Home > LIGHT METERS >

KENKO KFM-1100 AUTO DIGI LIGHT METER
KENKO KFM-1100 AUTO DIGI METER


 
Alternative Views:
Our Price: $680.00


Availability:: IN STOCK
Product Code: 080755
Qty:

DESCRIPTION
 
The KFM-1100 shutter speed can be selected in a range from as long as 30 minutes to as fast at 1/8000 of a second (This range is selectable in full stop, _ stop or 1/3 stop increments). The light reading is displayed on the meter’s LCD window as both digital and analog data. If you wish to select a different shutter speed after a reading is taken, the aperture reading will automatically change accordingly. The KFM-1100 can read a very wide range of light from the very low equivalent EV -2.0 to EV 19.9 (incident light based on ISO 100). The meter can also be set to a Cine mode to be used with Cine cameras and display light readings from 8 to 128 frames/sec.
When using with flash, select Cord or Non-Cord depending on the shooting conditions. For Cord setting, connect the Flash sync-cord to the Sync Terminal in the front of the KFM-1100 then a light reading can be taken by simply pressing the Measurement button on the side of the meter. When using a non-cord set-up, pressing the measurement button sets the meter in stand-by mode. When the flash is fired manually, the meter takes a reading.

Accessories
KENKO KFM-100 SPOTFINDER 5 DEGREES
Our Price: $265.00 NO STOCK

Add
KENKO KFM-100 SPOTFINDER 5 DEGREES

Share your knowledge of this product. Be the first to write a review »